Work Boat Brokers - Used Work Boats For Sale

180402-VW

442 hp Single Screw Multicat Work Boat


442 hp Single Screw Multicat Work Boat

This listing is for a 442 hp Single Screw Multicat Work Boat that was built in the Netherlands in 1989. It is a large versatile Multicat which is suited to a wide variety of roles such as construction assistance, dredge helping and towage. Can carry up to 216 m3 of fuel in addition to a full deck cargo and is ideally suited for offshore refueling. Also, an integrated 4 point mooring separate from her main winches & capstans.

Flag: United Kingdom

Location: Europe

For Charter


Technical Details

         
Principal Dimensions and Characteristics
  Year Built: 1989
  Make/Model: Delta MP / 2650 Multicat
  Hull Material: Steel
  Classification Society/Notation: International Loadline (UK & IRL)
  Length Over All: 27.05 m 89 feet
  Beam: 10.80 m 35.4 feet
  Draft: 1.95 m 6.4 feet
  GRT/NRT: 225/67
  Bollard Pull: 15 Tons (Ahead) / 8 Tons (Astern)
  Speed Maximum: 10 knots
  Accommodation:
    12 Passengers
Machinery and Propulsion
  Main Engine:
    Make/Model: Caterpillar / 3408B
    Power: 330 kW 442 hp
  Main Auxiliary Engine:
    Make/Model: Caterpillar / 3304
    Power: 98 kW 131 hp
    Voltage: 440 V
  Harbor Auxiliary Engine:
    Make/Model: Perkins / 3152 (Silenced)
    Power: 22 kW 30 hp
  Main Propulsion System: Single Screw
    Type: FPP in Kort Nozzles
    Diameter: 1,200 mm 47 inches
  Gear Boxes: Reintjes WAF 260
Tank Capacities
  Fuel Tank Capacity: 216.22 cubic meters 283 cubic yards
  Fresh Water Tank Capacity: 28.22 cubic meters 37 cubic yards
Towing and Anchor Handling
  Anchor Handling / Towing Winch:
    Make/Model: Heerenveen
    Capacity: 40 Ton (SWL)
  Mooring Winches (4):
    Make/Model: Eagle
    Capacity: 3 Ton (SWL)
  Capstan:
    Type: Hydrant Capstan
    Capacity: 4 Ton
Plough Dredging
  Large Removable “A” Frame
  Various 10 m Wide Dredging and Leveling Ploughs
  Dredgemaster Plough and Survey Software
  Trimble RTK GPS Positioning (includes Base Station)
Additional Deck Equipment
  Deck Crane:
    Make/Model: Effer 110Txm / 3S with winch
    Capacity: 31.5 t @ 3.5 m / 9.0 t @ 12 m
  Bow Roller: 3.0 m Heavy Duty Roller
  Docking Fender: Proven Wind turbine Docking fender to allow access for crew transfer
    or during refueling / lifting operations.
  Fuel Transfer: High & Low Pressure Fuel transfer system
  Power Washing: Integrated High Pressure Sea and Fresh Water Jetting System suitable
    for cleaning offshore turbines, Moorings and Buoys.
   
         
  All details on these pages are given in good faith and are believed to be accurate but no warranty of accuracy or completeness or suitability for purpose is either stated or implied. Prices are subject to change without notice
Copyright © 2018