200110-VO
4,800 hp Twin Screw Ocean Tug
The Offshore, Anchor Handling Tug Supply Vessel has 2 x A.B.C. 8 DZC engines with total power of 3570 kW (4,800 hp). It has 2 sets of controllable pitch propeller, in fixed nozzle with 2 streamlined double plate Rudders and bow and stern thrusters each with 400 kW (536 hp). The tug has a cruising range of 25 days at an 80% load. Accommodations are available for 24 persons in 4 cabins for 1, 3 cabins for 2, 2 cabins for 4 and 1 cabin for 6.
Fire Fighting FIFI One included:
Pumps: 2 x main pumps driven by main engine 1426 m3 each
Guns: 2 x guns mixte FFS 1400 m3 each, wheelhouse remote control
Foam capacity: 23 m3
Flag: France
Location: West Mediterranean
Technical Details
General | ||||
Built: | 2012 / Turkey | |||
Hull Material: | Steel | |||
Class Society and Notation: | BV Tug Supply DP1 | |||
Flag: | France | |||
Principal Dimensions and Characteristics | ||||
Length Over All: | 45.0 m | 147.6-feet | ||
Breadth: | 13.60 m | 44.6-feet | ||
Draft: | 3.60 m | 11.8-feet | ||
GT (tons): | 398 tons | |||
Speed Cruising: | 12 knots | |||
Machinery and Propulsion | ||||
Main Engine: | ||||
Total Power Output (BHP): | 3580 kW | 4800 hp | ||
Make/Model: | 2 x A.B.C. 8 DZC | |||
Main Propulsion System: | Twin Screw | |||
Propellers: | 2 | |||
Propeller Type: |
2 sets of controlable pitch propller, in fixed nozzle with 2 streamlined double plate Rudders |
|||
Auxiliary Engine: | volvo marine | |||
Auxiliary Engine Power: | 3 x 290 kW | 3 x 389 hp | ||
Bow Thruster: | 400 kW | 536 hp | ||
Stern Thruster: | 400 kW | 536 hp | ||
Cargo and Tank Capacities | ||||
Clear Deck Area: | 210 m2 | 252 yd2 | ||
Deck Space: | 21 m x 10 m | 68.8-feet x 32.8-feet | ||
Fuel Tanks: | 350 m³ | 92460 gals | ||
Fresh Water: | 120 m³ | 31,701 gals | ||
Ballast Tanks: | 160 m³ | 42,268 gals | ||
Cruising range: | 25 days at 80% load | |||
Deck Lay Out |
||||
Anchor Windlass: | 1x electro-hydraulic anchor Windlass fifted with warping heads, 14.9 tons | |||
Towing winch: | 1x winch aft deck, double drums, water fall, 150 tons holding, 50 tons x 10m/mn on 1st layer, 1 x 1000m x 48 mm, wire 1 x 700m x 42 mm, wire | |||
Second drum: | 1 x 1000 m x 48 mm | |||
Tugger winch: | 2 units of 5 tons, one 5 tons Positionning Windlass | |||
Stern Roller: | 1 x roller 710 x 2200 rpm, 70 tons SWL Shark jaw and 1 double set electro-hydraulic operated combination anchor handling | |||
Towing pins: | Kam Fork and towing pin for chain from 32 mm to 102 mm, SWL to be 200 tons | |||
Container Sockets: | 3 sets containers foundations for 20 containers | |||
Crane: | 1 x crane, capacity SWL 3.6 tons at 10.75 meter outreach | |||
All details on these pages are given in good faith and are believed to be accurate but no warranty of accuracy or completeness or suitability for purpose is either stated or implied. Prices are subject to change without notice. |